新增熱插拔底座資訊

ExDactyl.md

@@ -11,20 +11,20 @@
 
 
 #### 外觀
-![ExDatCyl](img/ExDatCyl.jpg)
+![ExDactyl](img/ExDactyl.jpg)
 基本上就是Ergodox的立體版，本來在還沒有用之前，會覺得如果要曲面的話，為什麼不是球面，而是這樣凹面，用了之後才知道，這樣子可以有效的縮短那些外圍按鍵的距離，另外在大姆指區，因為是立體的，在Ergodox覺得很難按的四個小按鍵，現在變得更好按到了。  
 
-![ExDatCyl 連接](img/ExDatCyl_conn.jpg)  
+![ExDactyl 連接](img/ExDactyl_conn.jpg)  
 兩邊按鍵的連接是用3.5耳機線，雖然不能像Ergodox一樣，可以單邊獨立運作，不過影響不大，連接電腦部份是使用micro usb，雖然我比較喜歡usb-c，影響也不大，基本上都是可以用的。  
 
 #### 使用感想  
 這次借用的是我的本命軸紅軸版，按起來非常滑順，害我很想請問是哪買來的，我也想要進個100顆。  
-不過重點應該是手勢的體驗，前面有提到，因為凹面的關係，所以外圍的按鍵距離縮短，這就造成了在打外圍的按鍵時，手不用移動太遠，和60%比起來，雖然60%手已經不太動了，可是在打外圍區的時候，還是要移一下，可是ExDatCyl打起來的感覺是手都黏在鍵盤上，不太用動，以下附上打字的影片給大家參考。  
+不過重點應該是手勢的體驗，前面有提到，因為凹面的關係，所以外圍的按鍵距離縮短，這就造成了在打外圍的按鍵時，手不用移動太遠，和60%比起來，雖然60%手已經不太動了，可是在打外圍區的時候，還是要移一下，可是ExDactyl打起來的感覺是手都黏在鍵盤上，不太用動，以下附上打字的影片給大家參考。  
 
 PS: 因為Ergodox類的鍵盤是左右分離，所以位置要自己調整一下，保持手在最舒服的姿勢，可以參考[Andy大的分享](https://ie321mx.blogspot.com/2020/04/exdactyl.html)
 
 
-##### ExDaCyl
+##### ExDactyl
 [![ExDaCyl試打影片](https://img.youtube.com/vi/8Def8ObkE4k/0.jpg)](https://www.youtube.com/watch?v=8Def8ObkE4k)  
 
 ##### Filco Minila air

files/xd60_rev3_20200625.json

@@ -0,0 +1 @@
+{"version":1,"notes":"","documentation":"\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n","keyboard":"xd60/rev3","keymap":"xd60_rev3_20200625","layout":"LAYOUT_all","layers":[["KC_ESC","KC_1","KC_2","KC_3","KC_4","KC_5","KC_6","KC_7","KC_8","KC_9","KC_0","KC_MINS","KC_EQL","KC_BSLS","KC_BSPC","KC_TAB","KC_Q","KC_W","KC_E","KC_R","KC_T","KC_Y","KC_U","KC_I","KC_O","KC_P","KC_LBRC","KC_RBRC","KC_DEL","KC_CAPS","KC_A","KC_S","KC_D","KC_F","KC_G","KC_H","KC_J","KC_K","KC_L","KC_SCLN","KC_QUOT","KC_NO","KC_ENT","KC_LSFT","KC_NO","KC_Z","KC_X","KC_C","KC_V","KC_B","KC_N","KC_M","KC_COMM","KC_DOT","KC_SLSH","KC_RSFT","KC_UP","TT(1)","KC_LCTL","KC_LGUI","KC_LALT","LT(1,KC_SPC)","KC_RGUI","KC_RCTL","KC_LEFT","KC_DOWN","KC_RGHT"],["KC_GRV","KC_F1","KC_F2","KC_F3","KC_F4","KC_F5","KC_F6","KC_F7","KC_F8","KC_F9","KC_F10","KC_F11","KC_F12","KC_NO","KC_NO","KC_NO","KC_NO","KC_NO","KC_UP","KC_NO","KC_NO","KC_NO","KC_NO","KC_PSCR","KC_SLCK","KC_PAUS","KC_NO","KC_NO","KC_NO","KC_NO","KC_NO","KC_LEFT","KC_DOWN","KC_RGHT","KC_NO","KC_NO","KC_INS","KC_HOME","KC_PGUP","KC_BSPC","KC_NO","KC_NO","KC_NO","KC_TRNS","KC_NO","KC_VOLD","KC_VOLU","KC_MUTE","KC_NO","KC_NO","KC_NO","KC_DEL","KC_END","KC_PGDN","KC_TRNS","RGB_TOG","KC_NO","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","KC_TRNS","RGB_MOD","KC_NO","RGB_RMOD"]],"author":""}

layout/xd60/keyboard-layout.json

@@ -1,95 +1,54 @@
 [
   [
     {
-      "c": "#b81b24",
-      "a": 3,
-      "fa": [
-        4
-      ]
+      "c": "#bc251e",
+      "a": 3
     },
     "ESC\n\n\n\n`\n~",
     {
       "c": "#cccccc",
-      "a": 4,
-      "f": 3
+      "a": 4
     },
     "!\n1\n\n\nF1",
-    {
-      "f": 3
-    },
     "@\n2\n\n\nF2",
-    {
-      "f": 3
-    },
     "#\n3\n\n\nF3",
-    {
-      "f": 3
-    },
     "$\n4\n\n\nF4",
-    {
-      "f": 3
-    },
     "%\n5\n\n\nF5",
-    {
-      "f": 3
-    },
     "^\n6\n\n\nF6",
-    {
-      "f": 3
-    },
     "&\n7\n\n\nF7",
-    {
-      "f": 3
-    },
     "*\n8\n\n\nF8",
-    {
-      "f": 3
-    },
     "(\n9\n\n\nF9",
-    {
-      "f": 3
-    },
     ")\n0\n\n\nF10",
-    {
-      "f": 3
-    },
     "_\n-\n\n\nF11",
-    {
-      "f": 3
-    },
     "+\n=\n\n\nF12",
     {
-      "f": 3
+      "a": 5
     },
     "|\n\\",
-    "\nSpace\n\n\n\n\nBack"
+    {
+      "a": 7
+    },
+    "BS"
   ],
   [
     {
+      "a": 4,
       "w": 1.5
     },
-    "\nTab",
-    "\nQ",
-    "\nW",
-    "\nE\n\n\n<i class='fa fa-caret-up'></i>",
-    "\nR",
-    "\nT",
-    "\nY\n\n\nCal",
-    "\nU",
-    "\nI\n\n\nIns",
-    "\nO",
-    "\nP\n\n\nPrtSc",
+    "Tab",
+    "Q",
+    "W",
+    "E\n\n\n\n<i class='fa fa-arrow-up'></i>",
+    "R",
+    "T",
+    "Y",
+    "U",
+    "I\n\n\n\nPrtScr",
+    "O\n\n\n\nSclLk",
+    "P\n\n\n\nPause",
+    "{\n[",
+    "}\n]",
     {
-      "a": 5,
-      "f": 3
-    },
-    "{\n[\n\n\nScrLk",
-    {
-      "f": 3
-    },
-    "}\n]\n\n\nPause",
-    {
-      "a": 4,
       "w": 1.5
     },
     "\n\n\nDel"
@@ -98,27 +57,19 @@
     {
       "w": 1.75
     },
-    "\nCaps Lock",
-    "\nA",
-    "\nS\n\n\n<i class='fa fa-caret-left'></i>",
-    "\nD\n\n\n<i class='fa fa-caret-down'></i>",
-    "\nF\n\n\n<i class='fa fa-caret-right'></i>",
-    "\nG",
-    "\nH",
-    "\nJ",
-    "\nK",
-    "\nL",
-    {
-      "f": 3
-    },
-    ":\n;",
-    {
-      "a": 5,
-      "f": 3
-    },
+    "Caps Lock",
+    "A",
+    "S\n\n\n\n<i class='fa fa-arrow-left'></i>",
+    "D\n\n\n\n<i class='fa fa-arrow-down'></i>",
+    "F\n\n\n\n<i class='fa fa-arrow-right'></i>",
+    "G",
+    "H",
+    "J\n\n\n\nInsert",
+    "K\n\n\n\nHome",
+    "L\n\n\n\nPgUp",
+    ":\n;\n\n\nBs",
     "\"\n'",
     {
-      "a": 4,
       "w": 2.25
     },
     "\n\n\nEnter"
@@ -128,36 +79,22 @@
       "w": 2
     },
     "\nShift",
-    "\nZ",
-    "\nX\n\n\n<i class='kb kb-Hamburger-Menu'></i>",
-    "\nC",
-    "\nV",
-    "\nB",
-    "\nN\n\n\n<i class='fa fa-volume-down'></i>",
-    "\nM\n\n\n<i class='fa fa-volume-up'></i>",
-    {
-      "f": 3
-    },
-    "<\n,\n\n\n<i class='fa fa-volume-off'></i>",
-    {
-      "f": 3
-    },
-    ">\n.",
-    {
-      "f": 3
-    },
+    "Z\n\n\n\n<i class='fa fa-volume-down'></i>",
+    "X\n\n\n\n<i class='fa fa-volume-up'></i>",
+    "C\n\n\n\n<i class='fa fa-volume-off'></i>",
+    "V",
+    "B",
+    "N",
+    "M\n\n\n\nDel",
+    "<\n,\n\n\nEnd",
+    ">\n.\n\n\nPgDn",
     "?\n/",
+    "\nShift\n\n\n<i class='fa fa-lightbulb-o'></i>",
     {
-      "a": 5
+      "a": 7,
+      "f": 6
     },
-    "\nShift",
-    {
-      "fa": [
-        4,
-        1
-      ]
-    },
-    "\n<i class='fa fa-caret-up'></i>\n\n\nPgUp",
+    "<i class='fa fa-arrow-up'></i>",
     {
       "a": 4,
       "f": 3
@@ -166,47 +103,44 @@
   ],
   [
     {
-      "c": "#f00e52",
+      "c": "#cb3d6e",
       "a": 7,
-      "f": 3,
       "w": 1.25
     },
-    "CTRL",
+    "Ctrl",
     {
-      "c": "#9b6482",
-      "f": 3,
+      "c": "#5d437e",
       "w": 1.25
     },
-    "WIN",
+    "Win",
     {
-      "c": "#009bca",
-      "f": 3,
+      "c": "#00a4a9",
       "w": 1.25
     },
-    "ALT",
+    "Alt",
     {
       "c": "#cccccc",
+      "a": 5,
       "w": 6.25
     },
-    "",
+    "\n(Space)\n\n\n\n\nLT1",
     {
-      "a": 4,
-      "f": 3
+      "a": 4
     },
-    "\nAlt",
-    "\n\n\nCtrl",
+    "Alt",
+    "Ctrl",
     {
-      "a": 5,
-      "f": 3
+      "a": 3,
+      "f": 6
     },
-    "\n<i class='fa fa-caret-left'></i>\n\n\nHome",
+    "<i class='fa fa-arrow-left'></i>\n\n\n\n<i class='fa fa-long-arrow-left'></i>\n\n\n\n\n\n\n<i class='fa fa-lightbulb-o'></i>",
     {
-      "f": 3
+      "a": 7
     },
-    "\n<i class='fa fa-caret-down'></i>\n\n\nPgDn",
+    "<i class='fa fa-arrow-down'></i>",
     {
-      "f": 3
+      "a": 3
     },
-    "\n<i class='fa fa-caret-right'></i>\n\n\nEnd"
+    "<i class='fa fa-arrow-right'></i>\n\n\n\n\n<i class='fa fa-long-arrow-right'></i>\n\n\n\n\n\n<i class='fa fa-lightbulb-o'></i>"
   ]
 ]

readme.md

@@ -1,4 +1,22 @@
 ## 鍵盤相關設定
 
 - ### [XD60](xd60.md)
-- ### [ExDatCyl 試用分享](ExDatCyl.md)
+- ### [ExDatCyl 試用分享](ExDatCyl.md)
+
+
+## 相關連結
+- [QMK](https://docs.qmk.fm)
+- [ErgoTaiwan - 如何自己做一個鍵盤](https://ergotaiwan.tw/self-keyboard-kicad-2/?fbclid=IwAR0zto9XBV_mChfCtSdPuBqemCzGiXwrqlZvZAXP4AlFZIlAJUfJs_AmPuk)
+- [keyboard layout editor](http://www.keyboard-layout-editor.com/)
+- [keyboard CAD Assistant](http://www.keyboardcad.com/)
+- [Plate & Case Builder](http://swillkb.com/)
+- [PCB 廠商名單](https://hackmd.io/h6AAVLdvSJOXKX8dk-f6ew?fbclid=IwAR221LXUamG3PhJVC-5MYLnX5fzz4YiQWdme5sM1aMMJZIQLzlSDjSxmA_s)
+- [手拉自制鍵盤](https://beta.docs.qmk.fm/using-qmk/guides/keyboard-building/hand_wire?fbclid=IwAR2QM50_3j_NKAWwlz2tXby9DjLUjctoUEEoOVOliyeIzb8EbdSFGpVUhAY)
+- [手拉ExDactyl](https://ie321mx.blogspot.com/2020/05/exdactylergodox.html?fbclid=IwAR0xKU4FwHFJ0iFqkSdKTGaYip6u3R_b0Uxgdax7C2dYXXe8IooyYJF78N0)
+- [入門自組鍵盤 by HaWay | COSCUP 2020](https://youtu.be/mqEA0vA-1EM)
+- [FB討論串](https://www.facebook.com/groups/1111882339005914/permalink/1484974535030024/?__cft__[0]=AZUnErwTWbaXLBIkkAUNTr19BgkD3ivE9ted1K7SBAxj5kQghfsURqc4BmHepaBJN_JsPN9Szjv4CmPeWsyTUUh9R72VKkRyRtmEDur4aQMRReNnIY98DsRXijhETCYBC_D1GvCm4VHt7DDpMULNcpj8dsiMEM6-sKXKihwU6jwk9g&__tn__=%2CO%2CP-R)
+
+## 熱插拔底座
+[source](https://www.ptt.cc/bbs/Key_Mou_Pad/M.1609947580.A.099.html)
+Mill-Max 0305 (較長)
+Mill-Max 0705

xd60_2.md

@@ -0,0 +1,12 @@
+### Current Layout
+- #### Layer 0  
+![Layer 0](img/xd60_qmk_01.png)
+
+- #### Layer 1  
+![Layer 1](img/xd60_qmk_02.png)  
+
+[QMK Configurator](https://config.qmk.fm/)
+
+[Firmware](files/xd60_rev3_20200625.hex)
+
+[Layout Json](files/xd60_rev3_20200625.json)